An Integrated Publishing, Inc. Site

An Integrated Publishing Website

Inspection Gages Precision Layout Tool Mil-Specs - FSC 5220

A-A-50767 - Analyzer, Surface Finish

FED-STD-346 - Gages, Wrench Opening (S/S By Ansi/Asme B107.17)

This Federal standard establishes the sizes for gages for wrench openings in items procured by the Federal Government.

GGG-B-121 - Bar, Sine, Plate Sine (And Fixtures)

GGG-B-461 - Block, Step, Machinists

GGG-G-61 - Gage, Plug And Ring, Plain And Thread

GGG-P-441 - Plate, Angle, Adjustable And Solid

GGG-P-463 - Plate, Surface, (Granite) (Inch And Metric)

This specification covers (igneous rock granite) surface for use in precision locating, layout, and inspection work.

GGG-P-61 - Parallel, Steel And Cast-Iron, Precision Ground

MIL-C-22520/18 - Crimping Tools, Terminal, Hand, Wire Termination In-Service Inspection Gage For Mil-C-22520/17 Crimping Tool (S/S By Sae-As22520/18)

MIL-C-22520/26 - Crimping Tool, Terminal, Hand Or Power Actuated, Wire Termination, In Service Inspection Gages For Mil-C-22520/25 Crimping Tool

MIL-C-22520/3 - Crimping Tools, Terminal, Hand, Wire Termination; In-Service Inspection Gages (S/S By Sae-As22520/3)

MIL-C-22520/35 - Crimping Tools, Terminal, Hand, Wire Termination; In-Service Inspection Gauges For Mil-C-22520/34 Crimp Tools (S/S By Sae-As22520/35)

MIL-C-22520/6 - Crimping Tools, Terminal, Hand, Wire Termination, In-Service Inspection Gages (S/S By Sae-As22520/6)

MIL-C-83988 - Comparator, Bench Type, Vertical Column, Electrically Amplified (S/S By A-A-58089)

This specification covers an electronically amplified, vertical column, bench type comparator.

MIL-C-83997 - Comparator Gage, Internal And External, Electronically Amplified (S/S By A-A-58089)

MIL-D-45608 - Designs And Drawings, Inspection Equipment (S/S By Dod-D-1000)

MIL-G-10944 - Gage, Dimensional Control

This specification covers dimensional control gages and is to be used in conjunction with the applicable drawings or documents that depict the type required.

MIL-G-45653 - Gage, Cylindrical Plug And Ring, Plain

This specification covers manufacture, inspection, and preparation for delivery requirements for plain cylindrical, plug and plain ring gages listed in Military Standards 110, 111, 112, 113, 116, 117, 133, and 134 and for plain cylindrical plug gages and plain ring gages made to American Gage Design Standard (AGD) specifications of sizes not listed in a Military Standard (Prototypes of the Mil-Stds).

MIL-G-45654 - Gage, Plug And Ring, Thread

This specification covers manufacture, inspection, and preparation for delivery requirements for united Standard and American National Standard thread plug, truncated thread setting plug, and thread ring gages.

MIL-G-46382 - Gage, Snap, Thread Roll

This specification covers basic requirements for the manufacture, inspection, and preparation for delivery of thread roll snap gages and is to be used in conjunction with drawings or documents that depict the type and style of the desired gages.

MIL-G-83984 - Gage, Surface Plate Flatness Checking (S/S By A-A-59120)

This specification covers a gage for checking surface plate wear, including a master reference gage calibrator, complete with protector cases and covers.

MIL-G-87955 - Gage, Snap, Adjustable, Dial Indicating

This specification covers requirements for three types of Gage, Snap, Adjustable, Dial Indicating.

MIL-G-87964 - Gage, Surface, Gage And Plate

This specification covers requirements of a gage (for checking the tolerance accuracy of any working surface plate) and for a master surface plate that will be used for calibration of the gage.

MIL-HDBK-204 - Design Of Inspection Equipment For Dimensional Characteristics

The purpose of the handbook is to assist personnel involved in the design, procurement, or production of materiel for the Department of the Army (DA) with the selection or design of inspection equipment for dimensional characteristics.

MIL-I-45177 - Instrument, Tracer, Surface Roughness (S/S By A-A-50767)

This specification covers the minimum essential requirements for instruments using stylus tracers with electrical amplification to measure surface roughness in the terms prescribed in ASA B46.1.

MIL-I-83992 - Inspection Machine (Measuring, Digital Readout, And Automatic Data Processing), Electronically Operated

MIL-P-10310 - Packaging Of Inspection Gages (Use Mil-G-10944)

MIL-P-14245 - Packaging Of Pullover Gage Assemblies And Accessory Kit.

MIL-S-45176 - Specimen, Comparison, Surface Roughness (Flat) With Carrying Case (S/S By Ansi-B46.1 Now Asme-B46.1)

This specification covers requirements for original and replica-type surface roughness comparison specimens with carrying case.

MIL-STD-110 - Gage, Plug, Plain Cylindrical Go

This standard covers the pertinent design data and stock mmbers for American Gage Design Standard, single end, go plain cylindrical plug gages for the inspection of the minimum limits of internal diameters that range in size from 0.031 to 2.510 inches inclusive in increments of 0.001 and 0.03125 inches. The class of gage required is listed in accordance with the total component tolerance.

MIL-STD-111 - Gage, Plug, Plain Cylindrical, Not Go

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard (AGD), single end, not go plain cylindrical plug gages for the inspection of the maximum limits of internal diameters that range in size from .031 to 2.510 inches inclusive in increments of .001 inch. Part numbers are also provided in increments of .0005 inch in sizes ranging from .031 to .8255 inches inclusive for components which have .0005 inch total component tolerance. The class of gage required is listed in accordance with the total component tolerance.

MIL-STD-112 - Gage, Ring, Plain, Go

This standard covers the pertinent design data and stock numbers for American Gage Design Standard, go plain ring gages for the inspection of the maximum limits of external diameters that range in size from 0.059 to 2.510 inches inclusive in increments of 0.001 and 0.03125 inches.

MIL-STD-113 - Gage, Ring, Plain, Not Go

This standard covers pertinent design data and stock numbers for American Gage Design Standard, not go plain ring gages for the inspection of the minimum limits of external diameters that range in size from .059 to 2.510 inches inclusive in increments.

MIL-STD-114 - Gage, Plug, Thread Go (Class X) For Unified American National Standard Internal Thread

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard, single end, go, right-hand thread plug gages for the inspection of the minimum limits of Unified Standard Classes 1B, 2B, 3B and American National Standard Classes 1, 2, 3 internal threads.

MIL-STD-115 - Gage, Plug, Thread Not Go Unified- American National Standard Internal Thread

This standard covers pertinents design data and Mil-Std Part Numbers for American Gage Design Standard, single end, HI (not go), right-hand thread plug gages for the inspection of the maximum limits of Unified Standard Classes 1B, 2B, 3B and American National Standard Classes 1, 2, 3 internal threads.

MIL-STD-116 - Gage, Ring, Thread Go (Class X) And Related Setting Plug Gages, Go And Not Go Plain Plug Minor Diameter Acceptance Check Gages For Unified And American National Standard External Threads

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard, go, right-hand thread ring gages for the inspection of the maximum limits of Unified Standard classes 1A, 2A, 3A and American National Standard classes 1, 2, 3 external threads.

MIL-STD-117 - Gage, Ring, Thread, Lo (Not Go) And Related Thread Setting Plug Gages, Go And Not Go Plain Plug Minor Diameter Acceptance Check Gages For Unified And American National Standard External Threads

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard, LO (not go), right-hand thread ring gages for the inspection of the minimum limits of Unified Standard classes 1A, 2A, 3A and American National Standard classes 1, 2, 3 external threads.

MIL-STD-118 - Gage, Snap, Plain Adjustable

MIL-STD-120 - Gage Inspection (W/Notice 1 Dtd 9 Sep 63)

This standard is to provide correlated technical information applicable to the inspection of gages, special tools, and measuring devices.

MIL-STD-133 - Cage, Plug, Plain Cylindrical, Go For Minor Diameter Of Standard Class Of Internal Thread

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard, single end, go plain cylindrical plug gages for the inspection of the minimum limits of the minor diameter of internal threads for Unified Standard classes 1B, 2B, 3B and American National Standard classes 1, 2, 3.

MIL-STD-134 - Gage, Plug, Plain Cylindrical, Not Go For Minor Diameters Of Standard Classes 3F Internal Thread

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard, single end, not go plain cylindrical plug gages for the inspection of the maximum limits of the minor diameter of internal threads for Unified Standard classes 1B, 2B, 3B and American National Standard classes 1, 2, 3.

MIL-STD-1452 - Gaging, General Principles Of

All gaging equipments required by the Department of Defense to verify compliance of product with design parameters specified in the relevant product drawing and specification.

MIL-STD-273 - Gage, Plug, Thread Setting, Class W, For Go Gages Unified Standard Classes 2A And 3A And American National Standard Class 3 External Threads

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard truncated thread setting plug gages for go gages for Unified Standard classes 2A and 3A and American National Standard class 3 external threads.

MIL-STD-274 - Gage, Plug, Thread, Setting, Class W, For Lo (Not Go), Gages, Unified Standard Classes 2A And 3A And American National Standard Class 3 External Threads

This standard covers pertinent design data and Mil-Std Part Numbers for American Gage Design Standard truncated thread setting plug gages for LO (not go) gages for Unified Standard classes 2A and 3A and American National Standard class 3 external threads.

MIL-T-22910/4 - Tool, Gage-Inspection For M22910/2 Crimping Tool (S/S By Mil-T-22910/8)

MIL-T-22910/5 - Tool, Hand, Gage-Inspection For M22910/3 Crimping Tool (S/S By Mil-T-22910/8)

MIL-T-22910/8 - Gage Inspection For M22910/7 Crimping Tool

MS14038 - Gage, In-Service Inspection, For Ms14037 Contact Crimping Tool (Use Mil-C-22520/3)

MS23003 - ( Images) Gages, Inspection For Ms23002 Crimping Dies (For Use With Ms25036 Insulated Terminals) (S/S By Sae-As23003)

MS25340 - Gage,-Inspection, For Ms 25037 Crimping Tool, Electric Terminals

MS25472 - ( Images) Gage, In-Service-Inspection, For Use With Ms25442 Crimping Dies (For Use With Aluminum Wire Terminals) (S/S By Sae-As5259/1)

MS27832 - Gage - Inspection For Ms27828 Crimping Tool And Ms27831 Miniature Crimping Tool (Use Mil-C-22520/3)

MS3151 - ( Images) Gage-In-Service Inspection, For Ms3150 Crimping Dies

MS3196 - Gage In Service Inspection, For Contact Crimping Tool

MS3197 - ( Images) Gage Pin For Socket Contact Engagement Test (S/S By Sae-As31971)

MS3199 - Gage - In-Service Inspection. For Ms3198 Contact Crimping Tool

MS3317 - Gage, In-Service Inspection, For Ms 3316 Terminal Crimping Tool

MS3434 - ( Images) Test Gage, Contact Location And Retention Feature, Mil-C-0081511 Series 1 And 2 Connectors

MS3435 - ( Images) Test Gage, Contact Location And Retention Feature, Mil-C-0081511 Series 3 And 4 Connectors

MS3460 - ( Images) Test Gage, Mil-C-0026482 Series 1 Or Mil-C-81703 Series 2 Contact Retention Feature

MS3461 - ( Images) Test Gage, Mil-C-0026482 Series 2 Or Mil-C-81703 Series 3 Contact Retention Feature

MS3462 - ( Images) Test Gage, Mil-C-26482 Series 2 (Class N), Mil-C-81703 Series 3 (Class N) And Mil-C-0081511 Series 3 And 4 (Class L) Contact Retention Feature